Web Socket Status
Websocket Status | Closed |
Wireless temperature monitor with two K-Type thermocouples(Range: -200C to 1200C, Resolution: 0.25C) and two solid state temperature monitors (Range: -55C to 125C, Resolution: 0.05C). 100 hours of operation with a 5Amp-hour battery
|
|||||||
An infrared camera with cloud archiving capability and time-lapse features. Also equiped with its own wireless server for isolated operation
|
|||||||
Wirelessly controlled ultra-high-vacuum bake-out system with programmable temperature ramp and 2500 Watts of heater power. The system uses solid state switching to give temperature regulation to within 0.1 degrees
|
|||||||
Wirelessly controlled ultra-high-vacuum bake-out system with programmable temperature ramp and 1 kW of heater power
|
|||||||
Wirelessly controlled 1200 Watt, 240 Volt relay with power meter
|
|||||||
Wirelessly controlled 12 V, 1.8 Amps stepper motor controller with 0.05 to 1.8 degrees of resolution
|
|||||||
Wirelessly controlled enviroment monitor with three temperature monitors, one humidity detector, and one moisture monitor
|
|||||||
Wirelessly controlled ionizing radiation monitor based on a Geiger–Müller tube
|
|||||||
Wirelessly controlled non-invasive vibration detector with a sensitivity of 2um and a bandwidth of 250 Hz using ultrasonic technology
|
|||||||
Wirelessly controlled test bench for the Blinky Shiver
|
|||||||
Wirelessly controlled fever detector using infra-red technology
|
|||||||
An component of the Blinky-Lite system for rapid prototyping. Blinky Wind includes an interval counter for measuring wind speed, analog digital acquistion for wind direction, an an integrated subsystem DS18B20 for temperature measurement all placed in a hermitcally sealed enclosure for outdoor use.
|
|||||||
Blinky Solar System is a distributed configuration controlling an 8kW home thermal solar system. Temperature differences between the remote solar panels and the basement water tanks triggers a water pump to circulate water through the panels to heat the house.
|
|||||||
The tutorial project that demonstrates Blinky-Lite features
|
|||||||
Remote Failure Monitor for New Brunswick HEF and G Freezers. Sends SMS alarms if a freezer temperature alarm, freezer power outage, or site power outage is detected. Alarm system is UPS powered and communicates over 4G providing continuous monitoring even during a complete site-wide power outage.
|
Warning
Text
Choice
Text
Warning
Text